Skip to content
WE HAVE MADE 17,000+ CUSTOMERS BOATING MORE AFFORDABLE
17,000+ CUSTOMERS BOATING MORE AFFORDABLE
3 way rod holderPort 99080P.jpg — Starboard 3-way 316 stainless snapper rack rod holder

3-Way Rack Rod Holder – Starboard| 316 Stainless

by MW Boating
$39.90 - $39.90
$39.90
$39.90 - $39.90
$39.90

One holder. Three rods. Starboard Side

Turn a single 30° flush or deck-mount rod holder into a three-rod snapper rack. This polished 316 stainless T-bar drops into the existing tube. A sliding nylon tapered spacer locks the height. A slot in the stem base engages the gimbal pin so the rack cannot spin.

Sold as Starboard side Mounting. The offset is built so the outer rod sits away from the motor and the rack leans outboard on that side of the boat. Order the side that matches the holder you will drop it into. Many boats run one of each.

Specifications

  • Material: 316 stainless steel
  • Finish: polished
  • Rods: 3
  • Width: 440 mm
  • Pole / stem length: 423 mm
  • Overall height (typical): 450 mm
  • Stem tube: 32 mm
  • Wire diameter: 6 mm
  • Weight: 1.13 kg
  • Fitment: inserts into a 30° deck-mount rod holder

Port or Starboard?

Port = left side of the boat when you face forward.
Starboard = right side of the boat when you face forward.

Use the version that matches the side of the boat. The geometry is mirrored so the rack points rods outboard and keeps the inboard cup clear of the motor. If you are standing at the transom looking forward, Port is on your left.