SEAFLO 12V 1100 GPH Automatic Bilge Pump | All-in-One Float Switch

More flow, no extra float switch required. The SEAFLO 1100 GPH automatic is the higher-capacity all-in-one — pump and float switch in one body — so you don’t buy, wire, or mount a second switch.

Water comes up, it starts. Water’s gone, it stops. No panel flicking at the ramp, and no power draw until the float actually calls for it.

Rated at 1100 gallons per hour (about 4,160 L/hr) through a 1-1/8" (29 mm) outlet, it is the step up from the 750 Auto when you want volume out of a mid-size hull. Anti-fouling impeller. Snap-off strainer for a fast clean when the bilge gets messy.

Straight motor oil in the bilge will not turn this pump on, so you are not pumping a slick over the side. Fully submersible, 18 AWG marine leads.

No extra float switch required. Sit it in the lowest point of the bilge, wire it up, and it looks after itself.

Key specs (12V SFBP1-G1100-06)

• Current: 3.0 A
• Max draw: 6.0 A
• Max head: about 3.7 m
• Open flow: about 1,141 GPH
• Outlet: 1-1/8" (29 mm)
• Wire lead: 1 m (3 ft)
• Unit weight: approx. 0.47 kg

Buyer note
Automatic operation uses the brown/white + black wires. For water only — not oil, fuel. Use a correctly rated fuse.