SEAFLO 12V 1100 GPH Low Profile Auto Bilge Pump | 14A Water Level Sensor,
The pump for the space nothing else fits. The SEAFLO 14A is a narrow, low-profile automatic — water-level sensors in the body, no extra float to buy or jam — so it sits deep in a tight or awkward bilge and still pulls the water down.
Rated at 1100 gallons per hour (about 4,160 L/hr). It starts when the water hits about 45 mm (1.77") and keeps going until the bilge is almost dry — drain-down as low as 10 mm (1/3"). Mount it horizontal or vertical. The outlet and body rotate 360°, and you get 3/4", 1" and 1-1/8" straight barbs plus a 90° option so the hose run can leave at the angle the hull wants.
A check valve stops water running back down the hose. Snap-fit body and low-profile strainer come off for a fast clean. Cartridge motor can be replaced later without pulling the whole install. Anti-airlock, stainless shaft, five-blade impeller, marine-grade wiring, 2-year warranty.
No extra float switch required. Wire the brown/white for auto, sit it in the lowest point, and it looks after itself.
Basic features
- Automatic water-level sensors — no float switch required
- Narrow low-profile body for tight / awkward bilges
- Starts at ~45 mm (1.77"), drains as low as 10 mm (1/3")
- 1100 GPH flow (approx. 4,160 L/hr)
- 12V DC (24V model SFBP2-G1100-14A also available)
- 360° rotating outlet and body
- Outlet options: 3/4" (19 mm), 1" (25 mm), 1-1/8" (29 mm) straight or 3/4" 90° elbow