SEAFLO 12V 1500 GPH Automatic Bilge Pump | 17 Series Electronic Sensor

Bigger hull, bigger pump — still no extra switch. The SEAFLO 17 Series 1500 GPH automatic uses capacitive water sensing to start when the bilge comes up and stop when it is dry. No separate float to buy, wire, or jam.

Rated at 1500 gallons per hour (about 5,680 L/hr) through a 1-1/8" (29 mm) outlet, this is the step up when the 750 or 1100 Auto is no longer enough. A removable check valve is included so water does not run back down the hose into the hull. Snap-off strainer for a fast clean. Ignition-protected and fully submersible.

This pump is built to clear standing bilge water. It is not a flood or damage-control pump.

Sit it in the lowest point, wire it up, and it looks after itself.

Basic features

• Automatic electronic water sensing — no float switch required
• Starts when water rises, stops when water is gone
• 1500 GPH flow (approx. 5,680 L/hr)
• 12V DC (24V model SFBP2-G1500-17 also available)
• 1-1/8" (29 mm) outlet
• Removable check valve to stop backflow
• Current: 7.0 A
• Max head: about 3 m (10 ft)
• Outlet: 1-1/8" (29 mm)